 |
|
|
|
|
|
|
|
|
 |
 |
 |
 |
 |
 |
 |
 |
|
|
|
|
||||||||||||
|
|
 |
 |
|
|
|||||||||
| December,
2007 |
|
||||||||||||
|
|
|
||||||||||||
Titan Mold/Die Carts for 2,000 lbs. and below |
|
||||||||||||
 |
|
|
|
||||||||||
| Titan
2390 |
|
The Titan 2390 has a capacity of 300 kg (660 lb). Gravity rollers allow for low friction manual transfers to/from the load deck. Transfer elevation is accomplished via a manual hand valve on the DC powered hydraulic power unit. A standard 12 VDC deep cycle battery can be charged on board or swapped out with a charged battery for high usage applications. Cart mobility is via the push handles located for correct ergonomics for the complete user size range. Plexi-glass guarding separates the operator from the mast lift components. A special end-of-deck profile mechanically interlocks with a press-mounted bracket and tool storage rack feature to prevent the cart from separating during tool transfers.More-> |
|
|
|||||||||
 |
|
||||||||||||
|
|
Green Valley Manufacturing, Inc. has added three standard low capacity free-ranging Titan mold/die change carts to its extensive line of QDC equipment. These new Titan tool change carts are designed specifically for smaller manufacturers with tools weighing below 2000 lb. Standard features include DC powered hydraulic mast lift, caster mobility, press/rack to cart mechanical interlock, gravity roller deck and die safety stop bar. For more information contact: Becky Hamilton |
|
|
||||||||||
|
|
|
||||||||||||
| Titan
2391 |
|
The Titan 2391 has a capacity of 500 kg (1100 lb). Approximate size is 36” wide X 50” long X 72” tall. Standard roller bed will accept a 20” wide X 28” long tool. Gravity rollers allow for low friction manual transfers to/from the load deck. Transfer elevation range of 9” to 57” is accomplished via a manual hand valve on the DC powered hydraulic power unit. A standard pair of 12 VDC deep cycle batteries (24 VDC system) can be charged on board or swapped out with a charged battery set for high usage applications. Cart mobility is via the push handles located for correct ergonomics for the complete user size range. Plexi-glass guarding separates the operator from the mast lift components. A floor lock holds the cart in place when parked. A special end-of-deck profile mechanically interlocks with a press-mounted bracket and tool storage rack feature to prevent the cart from separating during tool transfers.More-> |
|
|
|||||||||
 |
|
||||||||||||
| Available
Options |
|
||||||||||||
 |
|
|
|||||||||||
| Titan
2392 |
|
The Titan 2392 has a capacity of 1000 kg (2200 lb). Approximate size is 36” wide X 54” long X 78” tall. Standard roller bed will accept a 21” wide X 28” long tool. Gravity rollers allow for low friction manual transfers to/from the load deck. Transfer elevation range of 12” to 60” is accomplished via a manual hand valve on the DC powered hydraulic power unit. A standard pair of 12 VDC deep cycle batteries (24 VDC system) can be charged on board or swapped out with a charged battery set for high usage applications. Cart mobility is via the push handles located for correct ergonomics for the complete user size range. Plexi-glass guarding separates the operator from the mast lift components. A floor lock holds the cart in place when parked. A special end-of-deck profile mechanically interlocks with a press-mounted bracket and tool storage rack feature to prevent the cart from separating during tool transfers.More-> |
|
|
|||||||||
|
|
||||||||||||
 |
|
||||||||||||
|
|
|
||||||||||||
 |
|
||||||||||||
 |
|
||||||||||||
 |
|
||||||||||||
|
|
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
